Description: ( For Canadian customer, please visit www.evanscooling.ca ) Evans High Performance Coolant (previously known as NPG+C)Currently formulated for use in all gasoline internal combustion engines and light duty diesel applications; Evan High Performance Coolant, provides year-around protection and the best heat transfer characteristics.For all previously converted vehicles to Evans Waterless Coolants, this new High Performance formulation is a combination of the best benefits of both NPG+ and NPG-RACE.All Evans waterless coolants are compatible - therefore for applications previously installed with either NPG, NPG+ or RACE all can safely be topped off with the new High Performance Coolant (NPG+C) Evans High Performance Waterless Coolant (NPG+C) and Powersports Coolant are engineered to provide superior cooling performance and engine protection. Eliminate cooling failures caused by water.Evans Waterless Coolant’s high boiling point eliminates pump impeller cavitation. It remains a liquid under conditions where water would boil.The absence of water from the cooling system eliminates the cause of corrosion, Evans Waterless Coolants are safe for use with all metals.No electrolysis. Evans Waterless Coolants are non-conductive. Maximize boil-over protectionEvans Waterless Coolants boil at 375°F, Evans Coolants won’t boil over in hot weather, heavy loads, high altitude, or high power output. Evans Waterless Coolants instantly condense back to liquid state, providing constant liquid to metal contact, keeping metal temperatures under control.Boils 375F @0psi Freezes -40F Viscosity 2.3cp @ 212F Surface Tension 44dyn/cm Increase power output and fuel efficiency.Evans Waterless Coolants allow most engines to safely operate at a higher temperature. Engines can be safely tuned for more power or better fuel efficiency.When trapped heat is eliminated from the cooling system non-computer regulatd engines can operate at higher temperature increasing engine efficiency. Provide lifetime cooling performance and engine protection.Evans Coolants are non-corrosive with stable additives, no need to change the coolant or replace additives.Cooling effectiveness and corrosion protection continue for the life of the engine. Traditional water-based antifreeze must be flushed and changed at regular intervals.Reduced operating pressure eliminates stress and protects engine cooling components, hoses, and gaskets. Cavitation erosion and electrolysis are also eliminated.The additives in Evans Waterless Coolants are stable. No SCAs are needed for light duty or heavy duty diesel engines.Safer for handling and the environment.Evans Waterless Coolants are essentially non-toxic.Evans is safer to handle during installation and engine maintenance.Lifetime coolant helps preserve natural resources and reduce hazardous waste.Evans Prep FluidEvans Prep Fluid is a waterless cooling system flush designed to seek out remaining water after draining the cooling system of an engine. Prep Fluid should be used when block drains are unavailable or cannot be removed. It is not a substitute for thoroughly draining the cooling system and related components. A minimum of 2 gallons of Prep Fluid is recommended for heavy duty diesel engines and 1/2 gallon of Prep Fluid is recommended for all motorcycles converting to PSP, HP or NPG. Prep Fluidis NOT intended to be a stand-alone operating coolant, but as a flush only.
Price: 82.99 USD
Location: Champlain, New York
End Time: 2023-09-02T12:08:49.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 14 Days
Refund will be given as: Money Back
Brand: Evans
Manufacturer Part Number: Does Not Apply
Units Per Package: Pack of 2
Volume: 1 gal each
Warranty: Lifetime
Country/Region of Manufacture: United States
