2PC 9003 Positive and Negative Polarity Converter Negative switch harness H4 HB2

Description: H4 Positive & Negative Converter Negatively switch harness adaptor H4/9003 Switching Ground Polarity Module Converter If your car is negatively switched you require this adaptor Product Description Solution – A common problem found on many older Japanese vehicles, a switching ground oppose to power for traditional headlamp systems. This is not a problem for incandescent/halogen lighting but when converting to HID or LED, polarity matters. Designed – has designed and produced these ground switching modules to create a simple plug-and-play solution for most vehicles using an industry standard H4/9003/HB2 headlight plug with a switching ground when going from low to high beam. Installation – The SparkHID H4/9003/HB2 polarity cancelers are designed to simply plug in-between the stock H4/9003/HB2 plug and allow your aftermarket LED lights to function properly while switching from high to low beam and low to high beam. To ensure proper functionality, this listing include a pair for you to install one module on each side. Note – Some cars and trucks have factory connections that are reversed on either side, we strongly recommend checking each circuit with a volt meter or test light to check for low beam power, high beam power and ground or in some cases: ground, ground and power as one side of the vehicle may be different than the other.What’s Included Harness: 2x Switching Ground Adapter Compatibility Vehicles: All with H4/9003/HB2 Plug Tech Specs Blue Wire – GroundBlack Wire – GroundRed Wire – Power

Price: 29.99 USD

Location: Chicago, Illinois

End Time: 2024-12-13T08:50:13.000Z

Shipping Cost: 0 USD