Yuasa

3M Textured Surface Applicator TSA-1, For Large Surfaces, 1 each

Description: 3M™ Textured Surface Applicator TSA-1, For Large Surfaces DetailsHeat resistant foam roller.Before using this tool, read and following these important notes, cautions and warnings to ensure personal and mechanical safety.Use with a high temperature, electronically-controlled heat gun and 3M recommended films.Application tool designed specifically for conforming large areas of selected films to textured surfaces.3M Textured Surface Applicator TSA-1 Use for conforming large areas of film onto a textured surface. 1. Wear a heat-resistant glove on the hand that holds applicator TSA-1. 2. Gently tack the top few inches of the film to the substrate. Use tapping motion with your fingers or lightly roll it, without heat, using applicator TSA-1. 3. Set the heat gun to the temperature specified in Instruction Bulletin 5.37. To set edges, quickly and lightly pass the TSA-1 tool and the heat gun over the edges of the film to set the edges, but do not seal or conform the film; it is critical that air have an escape path during installation. This is especially recommended when using overlaminate 8524. 4. Direct the heat gun toward the top corner of the graphic. Heat the film until warm, which usually takes only about 2 seconds and immediately begin rolling the film with the applicator TSA-1. Notice that the roller is positioned about 2 inches above the top edge of the graphic for the first pass. 5. With the applicator closely following the heat gun, move continuously at about 2 inches per second and completely past the outer open edge of the graphic.

Price: 152.54 USD

Location: Cary, Illinois

End Time: 2024-09-11T17:05:23.000Z

Shipping Cost: N/A USD

Product Images

3M Textured Surface Applicator TSA-1, For Large Surfaces, 1 each3M Textured Surface Applicator TSA-1, For Large Surfaces, 1 each

Item Specifics

All returns accepted: ReturnsNotAccepted

Brand: Marshalltown

Model:

Size: Large

Type: Applicator

Recommended

Marshalltown QLT 12"x12" Aluminum Hawk NEW SEALED
Marshalltown QLT 12"x12" Aluminum Hawk NEW SEALED

$17.95

View Details
Marshalltown 614D 18"x 5/8" Half Round Runner Sled Concrete Tool Trowel 16564
Marshalltown 614D 18"x 5/8" Half Round Runner Sled Concrete Tool Trowel 16564

$19.99

View Details
Marshalltown 82 Brick Jointer, 5/8'' W Blade, 10-1/2'' L Blade, HCS (8-Pack)
Marshalltown 82 Brick Jointer, 5/8'' W Blade, 10-1/2'' L Blade, HCS (8-Pack)

$54.00

View Details
Marshalltown 33 12Fg Brick Trowel,London,12 X 5-1/8 In
Marshalltown 33 12Fg Brick Trowel,London,12 X 5-1/8 In

$47.15

View Details
State View~Flower Beds & Drive~Soldier's Home~Marshalltown Iowa~Vintage Postcard
State View~Flower Beds & Drive~Soldier's Home~Marshalltown Iowa~Vintage Postcard

$3.00

View Details
Marshalltown 19L10 Philadelphia Brick Trowel 10" x 5" w/ Leather Handle
Marshalltown 19L10 Philadelphia Brick Trowel 10" x 5" w/ Leather Handle

$47.95

View Details
MARSHALLTOWN 91792 0-1000PSI NSNP
MARSHALLTOWN 91792 0-1000PSI NSNP

$75.00

View Details
9 In. X 6 In. Blue Steel Edger With 1/2 In. R | Bs Marshalltown Concrete A Of
9 In. X 6 In. Blue Steel Edger With 1/2 In. R | Bs Marshalltown Concrete A Of

$25.24

View Details
MARSHALLTOWN MT34 Tamper,Rubber 22P305
MARSHALLTOWN MT34 Tamper,Rubber 22P305

$75.90

View Details
MARSHALLTOWN, Iowa Postcard LLOYD'S RESTAURANT Lincoln Highway 30 Roadside 1950s
MARSHALLTOWN, Iowa Postcard LLOYD'S RESTAURANT Lincoln Highway 30 Roadside 1950s

$6.87

View Details