ATOMSTACK 10W Laser Engraver Cutter 50W Machine Power for DIY Wood Metal Leather

Description: Highlights Dual Compression Spot TechnologyATOMSTACK S10 Pro laser engraver features 50W machine power and 10W laser output power. The ultra-fine laser focus area is reduced to 0.08x0.06mm, so the high-density laser can cut 15 - 20mm thick wood, engrave mirrors, stainless steel metal, ceramics, and glass. The cutting speed is 40% higher than the ordinary model.Support Offline EngravingS10 PRO laser engraving machine configures the terminal control panel, supports offline engraving, and with an emergency stop button. After you install the software and upload the file, you can carry out engraving work anytime and anywhere without being restricted by the computer.High-Performance Fixed-Focus LaserThe focal spot area of the new laser is only 1/3 of the spot area of other ordinary lasers. Features automatically fixed focus, the new laser combines precision engraving and high-energy cutting at the same time.New Filter Panoramic Glass Eye Protection DesignS10 laser engraving with the newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light, you do not need to wear goggles and could watch the engraving clear.Smart Limit Switch DesignLimit switches are installed on both X-axis and Y-axis. when the engraving machine stroke is at its maximum, the limit switch will be automatically triggered to protect the laser and avoid a collision.Wide CompatibilityThe ATOMSTACK S10 Pro engraving machine is compatible with various mature engraving software, such as LaserGRBL(Free), and LightBurn(may need to be paid). It supports Win XP / Win 7 / Win 8 / XP / Win 10 / Win 11 and supports Mac system (LightBurn). The engraving file format supports NC, BMP, JPG, PNG, DXF, etc. Specification General Brand: ATOMSTACKType: Laser Engraving MachineModel: S10 Pro Specification Model: S10 PROWorking Area: 410x400mmCarving Objects: Wood, bamboo, cardboard, plastic, leather, PCB board, aluminum oxide, non-reflective electroplating layer and paint surface layer metal, 304 mirrors stainless steel, glass, ceramics, cotton cloth, slateCutting Objects: Cardboard, non-woven fabric, wood board, acrylic, some thin plastic board, spongeMachine Power: 50WLaser Output Power: 10-11WWave Length: 445 ± 5nmEngraving Accuracy: 0.01mmFocusing Method: fixed focus laser, no need to focusLaser Protective Cover: Protect the user's eyes and prevent pets from grabbing the laser spot.Operating Software: LaserGRBL: supports Win XP / Win 7 / Win 8 / XP / Win 10 / Win 11 system; LightBurn: supports Windows/Mac OS/LinuxInput Format: NC, BMP, JPG, PNG, DXF, etc.Data Transmission Method: USB connectionInput Voltage: AC100-240V, 50/60HzOutput Voltage: DC 12V, 5A Weight & Size Package Weight: 6.05kgPackage Size(L x W x H): 60x35x13cm Package Contents 1 x Mounting Screw1 x Tool Kit4 x Foot Pad Foam1 x Film3 x Acrylic Sheet3 x Wood Chips10 x Wire Tie1 x Desiccant1 x Brush1 x Clean Cloth1 x Card Reader1 x TF Card1 x Power Adapter1 x Data Line1 x Touch Screen Components1 x HDMI Cable1 x Laser Module1 x Cutting Pad1 x X-Axis Assembly1 x Y-Axis Left Profile1 x Y Axis Right Profile1 x Profile on the Base1 x Under the Base Profile3 x Foot Bracket1 x User Manual FAQ Q: How long does it take to assemble? A: 5-15 minutes (Depending on your preparation). Q: Which engraving software is supported? A: LaserGrbl (Free)(Win XP, Win 7, Win 8, Win 10, Win 11) LightBurn (Paid-30 Day Free Trial)(Mac OS, Linux, Win XP, Win 7, Win 8, Win 10, Win 11) Q: What materials can be engraved? A: Metal, Glass, Ceramic, Wood, plastic (opaque), cloth, leather, and other materials that can be burned by the laser. Q: Can I engrave metal and stainless steel? A: You can mark the metal after plating or spraying (acting on the coating or oxide layer), and stainless steel (the effect is better after the stainless steel is painted black. Note: It is not engraving, but discoloration). Q: How many hours can the Atomstack Laser Engraving Machine work continuously? A: 24 hours (In a well-ventilated environment). Q: Can the laser module be replaced? A: Yes, but the Laser Module input voltage needs to support 12V. Q: Is it possible to engrave cylindrical surfaces? A: Need to purchase Atomstack R3 Rotary Roller as an accessory to sculpt the cylindrical surface.

Price: 499 USD

Location: Riverside, California

End Time: 2025-01-09T01:03:16.000Z

Shipping Cost: 0 USD