Corgi 1:72 Tornado GR.Mk 4 RAF No.15 Sqn ZA461

Description: Corgi Aviation Archive Collector Series AA33617 Panavia Tornado GR.Mk 4 Diecast Model RAF No.15 Sqn, ZA461, RAF Lossiemouth, ScotlandLimited Edition 1000 Pieces Worldwide 1:72 Scale Length WidthPanavia Tornado GR.Mk 4 9.25" 7.75" As we fast approach the Centenary year of the Royal Air Force in 2018, we can expect this significant occasion to attract plenty of media attention and form the basis of a spectacular Airshow year. In advance of these commemorations, a number of individual RAF Squadrons had already marked their Centenary years and delighted aviation enthusiasts by presenting one of their aircraft in a special commemorative scheme. Without doubt, one of the most attractive schemes applied to an RAF jet was the one that adorned Panavia Tornado GR.4 ZA461 of No.15(R) Squadron, whilst it was still based at Lossiemouth in Northern Scotland. With the impending drawdown of the remaining RAF Tornado force looming, this aircraft became something of a talismanic airframe for the "Mighty Fin" and the proud service record of this magnificent aircraft. Sadly, No.15 Squadron disbanded in March 2017, ending a glorious 102 years of service with the Royal Flying Corps and Royal Air Force, whilst also bringing to an end Scotland's long association with the Panavia Tornado. The RAFs last three remaining Tornado Squadrons are all now based at Marham in Norfolk, where they will remain until their intended service withdrawal date in 2019. Benefitting from much of the advanced technology developed during the controversially cancelled TSR.2 project, the Panavia Tornado was a Tri-national programme to develop one of the most sophisticated all weather strike attack aircraft in the world. With three major partners developing the aircraft and sharing production costs, it was hoped that economies of scale and shared technology would allow each country to introduce a highly advanced strike aircraft that would act as a significant deterrent to the Warsaw Pact nations. With its variable geometry wings and large tail, the distinctive Tornado is all about speed and power and during a long and successful service career, it has successfully taken part in a number of combat situations, most notably during the Gulf War of 1991. With many operators looking to replace the Tornado with fifth generation fighter/strike aircraft, the days of this Cold War warrior are now numbered, but if called upon in the near future, the capable Tornado will be ready for action. Panavia Tornado GR.Mk 4 Designed in collaboration with Britain, West Germany and Italy, the Tornado was first flown on August 14th, 1974 and is thought by many to be the most important military aircraft in Western European history. Nicknamed "The Flying Fin" because of its large tail fin, the Tornado has a variable wing sweep design and is capable of taking off and landing on short airstrips. It is equipped with terrain-following radar, which allows for hands-off, low-level flight in any weather. There are three primary versions: an electronic combat/reconnaissance version, an interceptor and a highly versatile strike fighter-bomber capable of carrying almost all of NATO's air-launched weapons. Copyright 2003-2024 The Flying Mule, Inc. Corgi's 1:72 scale Tornados feature the distinctively large tail fin that gives the real aircraft its nickname, "The Fin". The models also incorporates an articulating swing-wing design that can be configured in varying sweep positions, movable elevators that rotate in unison, and simulated stainless-steel heat shielding around the detailed engine exhaust. The wing mounted fuel tanks and ordnance can be positioned to fit any swept-wing configuration, and the repositionable canopy opens to reveal pilot figures and cockpit detail, including the distinctive embedded cordite charge used to shatter the canopy during the ejection sequence. The mold itself is exceptionally rich in detail, with every access panel and antenna faithfully reproduced. Pad-printed unit markings and placards provide the finishing touches. Copyright 2003-2024 The Flying Mule, Inc. Corgi Aviation Archive Collector Series The Corgi "Aviation Archive" range presents highly-detailed, ready-made diecast models of military and civilian aircraft. The vast Aviation Archive range has become the standard by which all other diecast airplane ranges are judged. Each Corgi model is based on a specific aircraft from an important historical or modern era of flight, and has been authentically detailed from original documents and archival library material. Famous airplanes and aviators from both military and commercial airline aviation are all honored. Corgi "Aviation Archive" diecast airplanes feature: Diecast metal construction with some plastic components. Realistic panel lines, antennas, access panels and surface details. Pad printed markings and placards that won't fade or peel like decals. Interchangeable extended/retracted landing gear with rotating wheels. Poseable presention stand to display the aircraft "in flight". Many limited editions with numbered certificate of authenticity. Detailed, hand-painted pilot and crew member figures. Authentic detachable ordnance loads complete with placards. Selected interchangeable features such as speed-brakes, opened canopies and access panels. Selected moving parts such as gun turrets, control surfaces and swing-wings. Copyright 2003-2024 The Flying Mule, Inc.

Price: 130.95 USD

Location: Grass Valley, California

End Time: 2024-10-08T00:49:18.000Z

Shipping Cost: 0 USD