Dental Lab Marathon Electric Micromotor Polishing Unit 35K RPM/40K RPM Handpiece

Description: 210+105L+40K RPM Grip [Application] The polishing micromotor fits all type of dental laboratory works and some other situations, such as Denture/Jade/Nail/Stone/Wood Polishing and Carving... Specifications · Main part Rated voltage :110V/60HZ, 220V/50HZ（Please set the voltage before using the machine） 2. Power Input: 110V AC 60HZ 220V AC 50HZ Out voltage: DC 0 - 32V Power: 65W Max Torque: gf 280 cm Rated Speed: -Main power controller: 1000 - 45000RPM (Max) -Grinder handle: 1000-40000RPM(Max) The power controller can be matched with 35K, 40K, 45K grinding machine handle. Plug: EU/US · Suitable for bur size: 2.35mm Instructions Don't change the turning directions too frequently, otherwise，it will damage the grinding head. Turn the speed control counterclockwise to decelerate the grinding head to the minimum before turning off and switch the main power source to 0. After operation put the grinding head on the top of the mail panel. When adjusting the speed, do not press the right switch button, wait for the handle stop and then press. Furlong idle time,please disconnect the source power. Warranty: Control box or foot pedal- 1year. Warranty dose not include bearings or normal wear of bearing, carbon brush，collect chuck, spindle and armature. Packing list: Control box *1pcs Motor handpiece *1pcs Foot control *1pcs Handpiece stand *1pcs Handpiece holder *1pcs Manual *1pcs M3+35K RPM Grip Description of product: Multipurpose Micromotor for dental，laboratory，jewelry，industry. Good work for polishing, Cutting, milling, trimming, grinding, casting moulds or materials and finishing surface. Dust seal protection for excellent durability. Simple and easy operation with variable foot pedal Control system. Installed special ball bearings for super high speed(less heat and noise) Another virtue is non-stage speed system (it's well designed to output from 0--35,000rpm by using non stage speed system) One year warranty! Our product has a virtue is tool exchange method which using CAM(twist the handle counter-clock wise to change the bur and can be easily restored back to the original position). Technical parameter: Input Voltage: 100~120V 50-60HZ Fuse specification: F2AL 250V Motor specification: DC32V-2A Max speed : 35000RPM Right & Left turning ability,Foot ON/OFF switch system Burs size :2.35 mm (3/32" chuck） Maximum torque：280gf.cm Note: This product is only suitable for 110V voltage, please do not use 220-240V voltage, as 220-240V will cause the machine to burn out. Packing: Control box*1 Handle bracket*1 102 handle*1 Wrench*1 Charger*1 Foot switch*1 N3+35K RPM Grip Dental Electric Micromotor polisher motor Unit N3: Description1. Compact sized control box with precise small and strong micromotor handpiece.2. Very High-powered and quality 0-35,000rpm Made by SHIYANG.3. One year warranty!4. Our product has a virtue is tool exchange method which using CAM(twist the handle counter-clock wise to change the bur and can be easily restored back to the original position).5. Another virture is non stage speed system(it's well designed to output from 0--- 35,000rpm by using non stage speed system).6. Right & Left turning ability7. Foot ON/OFF switch system8. Burs size :2.35 mm 9. 3/32" chuck Electrical specifications; Input Voltage: 110V 50-60HZ Fuse specification: F2AL 250V Motor specification: DC30V-0.5A Note: This product is only suitable for 110V voltage, please do not use 220-240V voltage, as 220-240V will cause the machine to burn out. Content:1 x SHIYANG Micro motor N3 S05 1 x Power Control unit1 x Foot Control system1 x Handpiece Suppor This product does not contain the handpiece! Model: WJ-204- Newly designed plastic grip handpiece SpecificationsIntroduction:Micro motor Dental Handpiece is an instrument made with motor and used for working with the turning force from the revolving motor up to 35000rpm. And it is applied to cutting, grinding, polishing. The use of various burs according to the material and working way are available. The products are mainly used for dental laboratory and dental clinic. The use range has been expanded gradually for Jewelry, Nail, Engraving, orthopedics, Industry market, beauty wood carving,egg carving etc.Feature:1)Portable Design- it is very convenient to use and take Installed special ball bearings for super high speed (So do not need add oil)2) 35,000 RPM's provides higher speeds, greater torque3) Newly designed front nose with 2 heavy duty front bearings4) Newly designed dust seal protection 5) Newly designed spindle balancing, 6) Newly designed cooling fan and air flow, 7) Newly designed plastic gripTechnical Parameter: 1. Burs size: 2.35 mm2. Speed range: 0-35,000 R.P.M3. Collet size: 3/32''Packing List: 1. 35,000rpm Handpiece: 1 PC2. Chuck wrench 1: PC3. Carbon brush 1: PC N3+E-Type Grip Description1. Compact sized control box with precise small and strong micromotor handpiece.2. Very High-powered and quality 0-35,000rpm Made by SHIYANG.3. One year warranty!4. Our product has a virtue is tool exchange method which using CAM(twist the handle counter-clock wise to change the bur and can be easily restored back to the original position).5. Another virture is non stage speed system(it's well designed to output from 0--- 35,000rpm by using non stage speed system).6. Right & Left turning ability7. Foot ON/OFF switch system8. Burs size :2.35 mm 9. 3/32" chuck Electrical specifications; Input Voltage: 110V 50-60HZ Fuse specification: F2AL 250V Motor specification: DC30V-0.5A Note: This product is only suitable for 110V voltage, please do not use 220-240V voltage, as 220-240V will cause the machine to burn out. Content:1 x SHIYANG Micro motor N3 S05 1 x Power Control unit1 x Foot Control system1 x Handpiece Suppor This product does not contain the handpiece! Feature about handpiece Portable Design Installed special ball bearings for super high speed E-Type Motor Connection to your straight & Contra Angle Handpiece Great things come in small packages. Equipped with a high torque brush motor with speeds up to 35,000 rpm. Specifications: 1. Speed: 35,000 RPM Max. 2. Standard E-Type Connection 3. Light Weight: 200g 4. Strong Power and Durable. 5. Lowest Noise and Vibration Design 6. Suit for Most brand low speed contra angle and straight handpiece and Marathon.

Price: 58.95 USD

Location: Fullerton, California

End Time: 2024-08-04T09:43:02.000Z

Shipping Cost: 0 USD