Hooke Road Off-road Front Rear Bumper w/ LED Lights for 2007-2013 Toyota Tundra

Description: Hooke Road Off-road Front Rear Bumper w/ LED Lights for 2007-2013 Toyota Tundra Type 1 Front Bumper3-Piece modular designAudacious, angular off-road design with hoopDelicate hollowed-out honeycomb design on both sidesHigh-strength D-ring mounts. D-rings not includedLicense plate mounting bracket includedFeatures 4×18W LED spotlightsIncludes a skid plate provides under-engine protectionComes with a winch plate that rated up to 12,000 poundsNot compatible with parking sensors Heavy-duty steel construction: 11-gauge(1/8 inch) plate for the bumper main body, 10-gauge(9/64 inch) steel plate for the winch plateTextured black powder coat finish & Premium E-coating process insideBumper weight: about 115 lbsDirect bolt-on installation. Mounting hardware included Type 2 Front Bumper3-piece modular designRugged styling and excellent protectionDecorated with a hollowed-out honeycomb steel plate2×18W LED square spotlights IncludedAccommodated with a 22" straight LED light bar(Not Included)Includes a skid plate that provides under carriage protectionHeavy-duty, high tensile 11-gauge(1/8 inch) steel for the bumper main bodyTextured black powder coat finish & Premium E-coating process insideBumper weight: about 83 lbsDirect bolt-on installation Type 3 Front Bumper w/ Winch Plate3-piece modular design. Perfectly fit the body line.Rugged styling and excellent protection4×18W LED square spotlights IncludedFeatures high strength D-ring mounts. D-rings not included.Comes with a winch plate that rated up to 12,000 lbsHeavy-duty steel construction: 11-gauge(1/8 inch) steel for the bumper main body, 10-gauge(9/64 inch) steel for the mounting structure plate.Textured black powder coat finish & Premium E-coating process insideBumper weight: about 95 lbsBolt-on installation. No drilling or cutting is required. Type 4 Front Bumper3-piece modular designDecorated with a hollowed-out honeycomb steel plate2×18W LED square spotlights IncludedAccommodated with a 22" straight LED light bar(Not Included)Equipped with a license plate mounting bracketHeavy-duty, high tensile 11-gauge(1/8 inch) steel for the bumper main bodyTextured black powder coat finish & Premium E-coating process insideBumper weight: about 75 lbsBolt-on installation w/ clear instruction Type 5 Front Bumper3-piece modular designRugged styling and excellent protection. Perfectly follows the body lines.Equipped with 4×18w LED spotlightsFeatures high strength D-ring mounts. D-rings not included.Comes with a winch plate that rated up to 12,000 lbsEquipped with a skid plate provides under-engine protectionHeavy-duty steel construction: 11-gauge(1/8 Inch) steel for the bumper main body, 10-gauge(9/64 Inch) steel for the winch plate and mounting structure plate. Textured black powder coat finish & Premium E-coating process insideBumper weight: about 102 lbsEasy bolt-on installation without drilling or cutting Type 1 Rear Bumper3-Piece modular designEquipped with a license plate light and 2×18W LED floodlightsFeatures high strength D-ring mounts. D-rings not includedIncludes license mounting plane and mounting holesPre-cut out for trailer connector Built-in side steps for quick bed accessWorks with the factory hitch receiverNot compatible with backup sensors Heavy-duty steel construction: 11-gauge(1/8 inch) plate for the bumper main bodyTextured black powder coat finish & Premium E-coating process insideBumper weight: about 84 lbsDirect bolt-on installation. Mounting hardware included Type 2 Rear Bumper3-piece modular design. Rugged styling and protectionIncludes a license plate light and 2×18w LED floodlights License plate placing plane and mounting holes includedPre-cutout for trailer connectorWorks with factory receiver hitch Not compatible with factory back-up sensorsIntegrated center and side steps for convenient access to truck bedHeavy-duty, high tensile 11-gauge(1/8 inch) steel for the bumper main bodyTextured black powder coat finish & Premium E-coating process insideBumper weight: about 58 lbsSimple bolt-on installation. No drilling or cutting is required.FITMENT: 2007-2013 Toyota Tundra Models Heavy-Duty Steel Construction. To ensure lasting strength, the Hooke Road Bumper has been built from heavy-duty steel. It also comes with a premium-level, black coating for lasting resistance against damage caused by rust and abrasion. Direct-Fit Installation. All you need to mount the bumper are basic hand tools. There is no drilling or cutting required. Firstly, remove the factory bumper. Secondly, assemble the two mounting brackets onto the vehicle frame. Then install the bumper onto the mounting brackets and keep the bolts loose. At last, adjust the positions of the bumper and tighten up all the bolts. Complete installation can take about 2 hours. Item IncludeOne BumperMounting hardwareLED LightsInstallation InstructionDELIVERY DETAILSPAYMENTABOUT RETURNABOUT USCONTACT USDELIVERY DETAILSNormally, your package will be handed to USPS/FedEx by 2 workdays, and the following delivery could take 1-10 day(s).Ourwarehouses are in CA/NJ, US. Your package will be shipped from the nearest warehouse which has stock. During the epidemic situation, information of logistics updated as well as deliveries could be delayed caused by lack of man power from logistics company. If the logistics information shows "Shipment information sent to XXX", your package has been handed to the logistics personnel. Please be patient or contact us for further information.PAYMENTWe accept Paypal, Visa, Mastercard, Apple Pay, Google Pay, American Express etc. ABOUT RETURNWe provide 30 days return guarantee for all items that we sold. But please contact us first. We will be happy to exchange or refund. All returned products must be in original condition and packaging. Please take some pictures of the product to us before sending out. Unfortunately, if products have been assembled or modified, we cannot take them as returns. Please save your return tracking number or post receipt, and email it to us. We need this in case there are any issues during transit. Refund will only be issued upon our receipt of the returned parcel.If the product was damaged on the return shipping way, we can only offer partial refund.ABOUT USWe are the authorized dealer of the "Hooke Road®" brand.The Hooke Road Brand has been certified as a member of SEMA. We have our own factory and design team. We make all kinds of specialty parts and accessories to make vehicles more attractive, more unique, more convenient, faster, safer, more fun and even like-new again. Wish you have a terrific off-road experience with our products.CONTACT USPlease contact us via eBay message. All E-mail will be replied within 24 Hours in working days or 48 hours on weekend.If you are satisfied with your purchase, please leave us 5 Star Ratings and Positive Feedback. It will be highly appreciated! Warm Prompt: If you have any problems with this order/item, such as items not being received on time or packages being damaged, please contact us firstly. We will give you a satisfactory solution.

Price: 499.88 USD

Location: Ontario, California

End Time: 2024-08-18T14:17:26.000Z

Shipping Cost: 0 USD