MIR880F Flagship FIR 8IN-8OUT Speaker Mgmt System AUTHORIZED DEALER!!!

Description: Marani MIR880F Flagship FIR 8IN-8OUT Speaker Management System AUTHORIZED DEALER!!! FEATURESThe Mir-F family of digital processors are Marani's new flagship system processors, including the MIR480I and MIR880F.The hardware adopts top AD/DA chips with excellent -96dBu background noise. It also has analog, digital AES/EBU, and Dante signal access capabilities, and has automatic switching function. Any signal can be set as the highest priority. As the core processor of the system, it has the redundancy and backup characteristics, and is suitable for government projects, high-end clubs, large mobile performances, theaters, radio and television and other places with higher requirements for signal processing.From the input gain/delay/noise gate /EQ/ compression /FIR to the output gain/delay/polarity/crossover/FIR/EQ/ compression/peak limiter, the parametric equalizer (PEQ) has up to 13 filter types to choose from. The output crossover filter has the classic Ringquitzrelli/Bessel/Butterworth, The NXF（Notched X-over Filter） and FIR filter with slope up to 120dB per octave are also available. The new MIR linear phase crossover filter makes it easier to engage the phase of the crossover point and produces lower latency. Everything we offer is for better sound.With the addition of DSP plug-in, traditional processor architecture is usually fixed and unadjustable. Marani innovatively introduces the concept of plug-in, and uses powerful co-processor to complete dynamic processing that traditional processor is difficult to complete, such as dynamic balancing, linear phase multi-segment compression, feedback suppression and other functions. This feature is an open architecture, and the type and number of plug-ins will be updated from time to time.The new design of Hard Limiter allows constant rate limiting of signals exceeding the threshold at any threshold, better protecting the speaker unit.Each input/output channel provides a filter with a maximum of 512 tap FIR. You can use the built-in AutoEQ plus an external ASIO sound card to measure pulse and generate FIR coefficient or use third-party software to generate FIR coefficient as you need. For speaker preset, phase response can be improved and directivity can be controlled as required.The new MIR linear phase crossover has the type and shape of the traditional IIR filter, but does not produce any phase distortion, and the delay generated is about 50% of the FIR filter. SPECIFICATIONS Audio Input impedance20KΩOutput impedance150ΩA/D dynamic range123dBD/A dynamic range129dBMaximum input level+20dBuMaximum output level+20dBuTotal harmonic distortion<0.0015% (+21dBu 1KHz)Frequency response20Hz~45kHzNumber of Dante channels4x4@48kHz 2x2@96kHz Ultimo/Brooklyn optionalCrosstalk≦-98dBSignal-to-noise ratio≧116dB +20dBu 1KHzNoise floor ≦-96dB (A weighting)Common Mode Rejection Ratio65dBNumber of analog input channels4Number of analog output channels8Rs485 control port2Network control port1 DSP & Processing Input & output gain-18 dB ~ +12 dB, 0.1dB stepNoise gateThreshold range: -80dBu~-45dBu attack time: 1ms~1000ms; Release time: 1ms~1000msDynamic loudness filter Gain range: 0dB-10dB attack : fast/medium/slowParametric equalizerInput channels up to 27 optional types of PEQ, output channels up to 8 optional types of PEQOptional types include Bell, 1st order high Shelf filter, 2nd order high Shelf filter Variable Q, high Shelf filter, 1st order low Shelf filter, 2nd order low Shelf filter Variable Q low Shelf filter, 1st-order low-pass filter, 2nd-order low-pass filter Variable Q low pass filter, 1st order high pass filter, 2nd order high pass filter, Variable Q high pass filter, notch filter， 1st order all-pass filter, 2nd order all-pass filter with variable Q valueThe center frequencyadjustable within the frequency range of 20Hz~20kHz with a 1Hz stepQ value/bandwidthThe Q value range of Bell filter is 0.4~128, the step is 0.01 The range of the Q value of the Chevron/high-pass/low-pass filter is: 0.1~5.1, and the step is 0.01 The value range of bandpass/notch filter Q is: 4~104, step is 1Equalizer gain range-15dB～+15dBIIR crossover filterButterworth slope: 6/12/18/24/36/48dB per octave Bessel slope: 12/24dB per octave Linkwitz-Riley slope: 12/24/36/48dB per octave NXF slope is 40/45/50/50/55/60/65/70/75dB per octaveMIR linear phase filterButterworth slope: 6/12/18/24/36/48dB per octave Bessel slope: 12/24dB per octave Linkwitz-Riley slope: 12/24/36/48dB per octave NXF slope is 40/45/50/50/55/60/65/70/75dB per octaveFIR crossover filtertype; high pass/low pass/band pass/external import Taps range: 256 ~ 512, slope range 21 ~ 120dB per octave Time window type: Rect / Sinc / Keiser /Hanning / Hamming / Blackman /Blackman-Harris/ Blackman-Nuttal / Nuttal/Keiser -Bessel/SineRMS compressorThreshold range: -10dBu~ +20dBu; attack time:0.1ms~1000ms; Release time: 10ms~15000ms Ratio range:2~32: 1 Soft knee: 0~100% Make up:Maximum 12dBPeak limiter Threshold range: -10dBu~ +20dBu attack time: 1ms~1000ms; Release time: 10ms~3000msHard limiterThreshold range: -10dBu~ +20dBuDelayThe adjustable delay time of each input channel + output channel is 452ms, 0.0104ms (10.4us) StepFIR filter Each input channel and output channel can import 48kHz sampling rate 512 tap FIR filter currently, the FIR filter in the plug-in can be switched to 96kHz sampling rate, up to 4096Taps@48k/3600Taps@96k tap number to achieve full frequency linear phase. General Dimensions482x44x253(mm) 1RU Weight, Net / Shipping 3.3 Kg / 3.8KgPreset number50

Price: 2499.99 USD

Location: Layton, Utah

End Time: 2024-11-04T21:37:38.000Z

Shipping Cost: N/A USD