Yuasa

NEW OIL SEAL 402516N SUIT Holden Statesman 2000 on :Diff Pinion

Description: Stores - 999automotive - Storesyou are buying NEW OIL SEAL 402516N SUIT Holden Statesman 2000 on :Diff PinionMESSAGE TO CUSTOMERS IMAGE IS FOR REFERENCE ONLY (NOT THE ACTUAL ITEM) EXTRA SHIPPING FEE MAY APPLY ON ORDER TO NT, SA, TAS & WA~ 999 Automotive ~ YOU ARE BUYING on a quality oil seal Note: Listing is for one item of listing title part-number only 100% BRAND NEW !!!!!!!!!!!! * * * (Note Picture maybe illustration only, parts shipped with be correct as per above details)* * * * * * (Note Picture maybe illustration only, parts shipped with be correct as per above details)* * * FITCO OIL SEALS ARE PRODUCED FOR INDUSTRIAL, AUTOMOTIVE AND AGRICULTURAL APPLICATION, THEY ARE IN SINGLE LIP OR DOUBLE LIP, WITH METAL INSERTED & METAL COVERED. Examples of Improper & Correct Installation methods. Improper method Correct method * * * (Note Picture maybe illustration only, parts shipped with be correct as per above details)* * * Seal Materials detail MaterialColorTemperature LimitsInformationHPU Polyurethane Also referred to as: Urethane, HPU, PURRed (Also could be Natural Milky White or Honey Colored)-22 to 230oF -30 to 110oCUse in: Hydraulic cylinders as rod seals and piston seals. This material is most commonly used as hydraulic u-cups, rod wipers and packings. Description: This is a high performance material with improved resistance to hot water (up to 200°F) makes it ideally suited for mining applications where water based hydraulic fluids are used. Can be used for pressures to 6000 psi. It is excellent in oil based hydraulic fluids. Great abrasion resistance. Resistant to most oils, fuels, gases. Can be used successfully as a drive belt of various shapes. Characteristics: Plastic-like. Shiny surface finish. Difficult to stretch.NBR Nitrile Rubber Also referred to as: NBR, Buna-N, BunaBlack-22 to 210oF -30 to 100oCUse in: Pneumatic seals, O-Rings, oil seal lips, gaskets, washer and low pressure hydraulic seals. Can be used with a back-up ring in higher pressure applications. This is the most popular o-ring material. Description: General purpose elastomer for use as seal energizer or low pressure applications such as hydraulics and pneumatics. Resistant to oils, hydraulic fluids, water fuels, gases. Not suited for use in brake fluids. Good abrasion resistance. Good resistance to compression set. High tensile strength. Characteristics: Rubber-like elastomer. Dull, matte finish. Some NBR o-rings have a very shiny surface.HNB Highly Saturated Nitrile Rubber Also referred to as: HNBR, Hydrogenated Nitrile, Hydrogenated NBR, Hydrogenated Buna-NBlack-13 to 302oF -25 to 150oCUse in: Seal and gasket application requiring additional resistance to chemicals and slightly higher temperatures than can be handled with NBR. O-Rings, washers, rod and piston seals, back-up rings, gaskets. Description: HNBR is achieved by hydrogenated NBR. Greatly improved wear and extrusion resistance over standard NBR. Good chemical compatibility and can be used with oils which have aggressive additives. Has an extended high temperature range. Characteristics: Rubber-like elastomer. Dull finish.VIT Fluoroelastomer- VitonR Also referred to as: VIT, VitonR, FKM, FluorocarbonBrown (Also could be Black, Green - molded o-rings)-4 to 392oF -20 to 200oCUse in: Tough sealing applications requiring extreme chemical resistance. O-Rings. Hydraulic seals. Pneumatic seals. Description: An excellent elastomer for use in high temperature applications. Also exhibits excellent chemical resistance for use in harsh environments such as phosphate esters. Widely used in applications dealing with extreme temperature and/or extreme chemicals. It is suitable to use with all chemicals (exception - Skydrol, certain esters and ethers) makes it a popular elastomer in chemical processing, paper / pulp mills, various chemical, acid and solvent applications. Characteristics: Rubber-like elastomer. Noticeably heavier than NBR. Dull, non-glossy finish. Smells like cinnamon.EPD EPDM Rubber Also referred to as: EPD, EPR, EP, Ethylene PropyleneBlack-49 to 300oF -45 to 150oCUse in: Sealing lips of special oil seals, u-cups, wiper rings, o-rings, gaskets, washers, rollers. Description: For use in high temperature water, steam and brake fluids. This elastomer must not come in contact with mineral oils or grease. It is used in applications that deal with acids, weak alkalis. EPD is sometimes and acceptable FDA material. Characteristics: Rubber-like elastomer. Strong rubber smell.SIL Silicone Rubber Also referred to as: SIL, Silicone, SilasticBlue-75 to 392oF -60 to 200oCUse in: O-rings, special low pressure seals, gaskets. Description: An excellent material generally used for static seals with exce lent low and high temperature stability and good resistance to aging. Generally not suited for dynamic applications due to poor tensile strength and abrasion resistance. Does exhibit excellent resistance to extreme temperature and is an acceptable FDA material. Typical use for silicone in dry heat applications and food processing applications. Characteristics: Very springy like rubber-type material.sometimes whiteOrangeTFV Virgin PTFE Also referred to as: PTFER, Virgin PTFER, PTFE, TFE, TFV, PolytetrafluoroethyleneWhite-328 to 500oF -200 to 260oCUse in: Packings, gaskets, seals, washers, spacers, insulators, wheels, rollers, bearings, guide rings. Description: An extremely low friction material which remains stable at both low and high temperatures. The chemical resistance of this material is outstanding. Can be used in applications with extreme temperatures, extreme pressures and extreme chemicals. Since PTFER TFV has a tendency to cold flow and has no memory. It can be filled or mixed with glass, bronze, and nickel to enhance its properties. Characteristics: Semi-rigid plastic material. Most of the time it is finished by machining.TFG PTFE/Glass Also referred to as: TFG, Glass-filled PTFER, Glass-filled PTFEOff-White (Appears to have small fibers contained.)-328 to 500oF -200 to 260oCUse in: Wear parts requiring low friction and good wear resistance and high pressure resistance. Description: Similar to TFV or Virgin PTFE with significantly improved wear resistance and heat transfer due to glass filler. Excellent for dynamic applications and for higher pressures. Characteristics: Semi-rigid plastic material. Most of the time it is finished by machining.TFB PTFE/Bronze Also referred to as: TFB, Bronze-filled PTFER or Bronze-filled PTFEMetallic Tan or Light Brown-328 to 500oF -200 to 260oCUse in: Wear parts in hydraulic cylinders requiring load bearing along with low friction guiding parts, sealing rings. Description: Similar to PTFE / Glass but with superior wear and extrusion resistance due to bronze filler. Excellent for dynamic applications and pressures to 6000 psi. Characteristics: Semi-rigid plastic material. Most of the time it is finished by machining.TFN PTFE/Nickel Also referred to as: TFN, Nickel-filled PTFER, Nickel-filled PTFEMetallic Grey or Light Grey-328 to 500oF -200 to 260oCUse in: Wear parts in hydraulic cylinders requiring load bearing along with low friction guiding parts, sealing rings. Description: Similar to PTFE / Glass or PTFE / Bronze but with superior chemical, wear and extrusion resistance due to Nickel filler. Excellent for dynamic applications and pressures to 6000 psi. Characteristics: Semi-rigid plastic material. Most of the time it is finished by machining.POM Polyoxymethylene- DelrinR Also referred to as: POMWhite-58 to 210oF -50 to 110oCUse in: Wear rings, guide rings, piston and rod bearing rings, bushings, spacers, washers. Description: A high strength engineering plastic suitable for bearings, bushings and guide bands. Physical properties achieved are almost like cold-rolled steel. Low moisture absorption. Excellent as a hydraulic component in water based fluids. Characteristics: Rigid plastic. Most of the time it is finished by machining.BlackUHM PTFE-PRO G Also referred to as: UHMTranslucent White / Pearl-450 to 180oF -268 to 82oCUse in: Suitable for abrasive media. Recommended for long wear life under severe conditions. Description: Extremely tough, long wearing, but limited heat and chemicl resistance. Particulary suitable for abrasive media. Characteristics: Meets FDA requirements. Coef. Friction: .11TFR Rulon J Propretary Filled TFE Also referred to as: TFRBrown-450 to 400oF -268 to 205oCUse in: Rcommended for moderte to high speed dynamic service running against soft metals. Description: Proprietary plastic reinforced (filled) PTFE. Characteristics: Superior heat and wear resistance. Non-abrasive. Coef. Friction: .15TFT Teal-Lon Also referred to as: TFTTeal-450 to 400oF -268 to 205oCDescription: Modified PTFE with similar properties to PTFE-PRO 01 (Virgin PTFE) material but with substantially improved wear resistance. Replaces popular blue/green materials used in industrial applications. Coef. Friction: .09ALU Aluminum Also referred to as: ALU, Aluminum alloySilver Metallic Very shiny when machined-58 to 1000oF* -50 to 500oC* Use in: Crush washers. High temperature spacers and rings. Used for the outer casing and the inner retainer ring on rubber lipped oil seals requiring a metal component to hold the seal in a housing. For seals in gear boxes, power transmission equipment, shaft housings, chemical equipment, vehicle parts and shaft components. Description: Alloy 6061 Aluminum is an extremely versatile alloy which combines good formability, high corrosion resistance, and medium strength. Yield strength is 40 ksi. Hardness is 95 Brinell. Melting range is 1080° to 1205°F. Can be used as oil seal insert or casing up to 15 PSI. For higher pressure rotary shaft seals, ask your EPM Seal Specialist. Characteristics: Soft, multi-functional metal. Finished by machining. ABOUT US Triple Nine Automotive (999Automotive) was established in 2003 with the goal of providing customers a one stop place for all their vehicle needs. With more than 2000 performance products in our warehouse, we are proud to say that we will be able to cater to your requirements. At the workshop, our mechanics are trained from standard mechanical repairs to performance modifications, including suspension upgrades and a skilled in-house fabricator for your custom requirements. Equipped with a 4WD dynamometer from Dyno Dynamics, 999 Automotive provides aftermarket ECU tuning along with our customers being able to find out how much power their car produces in ShootOut mode. Our aim is to make our customers' cars reliable, we want our customers to enjoy the fun of the modifications we perform to their cars. Therefore, the power figure is not the only thing we are concern about. We care for all the modifications that make your car run smooth. In addition, we offer car enthusiasts our technical experience and expertise as well as the ability to diagnose and rectify any mechanical problems of your car to perform better or run more cost efficient. Our showroom displays a wide range of products for both interior and exterior upgrades from appearance to performance. OUR STORES PAYMENT METHODS 1. PayPal This can be paid in Australia Dollar. PayPal will determine your local currency rate at the time of the transaction. Handling charge may be applied to PayPal payment. Signing up for PayPal is quick and easy and allows fast, secure payments.2. BANK DEPOSIT WITHIN AUSTRALIAThis payment method can be selected when you have bank account in Australia to pay through internet transfer or to make a payment at any Bank branches in Australia. 3. Pay in StoreIf you have time to visit one of our branches for your product, please contact us before coming to pick up. We will arrange the product for you and inform you when they are ready. Postage & Handling *Please make sure to email us your Shipping Details as soon as payment been made. *Please allow 1-2 Working Days for payments to reach us and cleared by PayPal. *If paying via Bank, we will despatch the items as soon as payment is cleared Returns & Refunds *Refunds can only be made within 7 days. *No refunds will be given for change of mind. No returns or exchanges if the item been installed, scratched, damaged or modified. *we will NOT cover any labour charge for any refund cases! *Please verify the correct part before ordering and installing, email us if you are not sure. We are more than happy to assist you CONDITIONS OF SALEPlease ensure that you read and acknowledge the following terms and conditions prior to placing your order with TRIPLE NINE AUTOMOTIVE. PRICES All prices listed in our website, advertisement and/or catalogue do not include shipping & handling charges. All prices are mail order prices; extra fees may apply for pick up. All prices and descriptions are subject to change without notice.Online Team - 999Automotive

Price: 17.97 AUD

Location: Lidcombe, NSW

End Time: 2025-01-16T13:23:09.000Z

Shipping Cost: N/A AUD

Product Images

NEW OIL SEAL 402516N SUIT Holden Statesman 2000 on :Diff PinionNEW OIL SEAL 402516N SUIT Holden Statesman 2000 on :Diff PinionNEW OIL SEAL 402516N SUIT Holden Statesman 2000 on :Diff PinionNEW OIL SEAL 402516N SUIT Holden Statesman 2000 on :Diff Pinion

Item Specifics

Returns Accepted: ReturnsNotAccepted

Brand: Amaando

MPN: 402516N (08568)

Manufacturer Part Number: 402516N (08568)

Return Postage Charges: Buyer will pay for any return postage

Item Picture: NOT the Actual Item (For Reference Only)

Recommended

Cigarette Gold Lighter Socket Car 12V DC
Cigarette Gold Lighter Socket Car 12V DC

$16.00

View Details
Amaando - Driveline Axle Hub Oil Seal - 400782N - TC 38x52x7 - 38mm x 52mm x 7mm
Amaando - Driveline Axle Hub Oil Seal - 400782N - TC 38x52x7 - 38mm x 52mm x 7mm

$3.74

View Details
Amaando - Driveline Axle Hub Oil Seal - 400388N - TC 40x55x8 - 40mm x 55mm x 8mm
Amaando - Driveline Axle Hub Oil Seal - 400388N - TC 40x55x8 - 40mm x 55mm x 8mm

$4.99

View Details
Amaando - Driveline Axle Hub Oil Seal - 401920N - TC 3.000x3.750x0.500
Amaando - Driveline Axle Hub Oil Seal - 401920N - TC 3.000x3.750x0.500

$8.11

View Details
Amaando - Driveline Axle Hub Oil Seal - 400788N - TC 1.750x2.500x0.375
Amaando - Driveline Axle Hub Oil Seal - 400788N - TC 1.750x2.500x0.375

$3.37

View Details
AMAANDO Brown Cigarette Lighter Socket Car 12V DC
AMAANDO Brown Cigarette Lighter Socket Car 12V DC

$17.00

View Details
SALE- AMAANDO OIL SEAL 400621N 2PC
SALE- AMAANDO OIL SEAL 400621N 2PC

$5.62

View Details
Toyota Dyna BU30 1977 – 1981 Seal Crankshaft Engine Rear Oil NOS 90311-95091
Toyota Dyna BU30 1977 – 1981 Seal Crankshaft Engine Rear Oil NOS 90311-95091

$22.00

View Details
Amaando - Driveline Axle Hub Oil Seal - 401910N - TC 2.625x3.625x0.500
Amaando - Driveline Axle Hub Oil Seal - 401910N - TC 2.625x3.625x0.500

$8.11

View Details
Amaando - Wheel Bearing Seal - Rear - 401983N - TC 50x62x8 - 50mm x 62mm x 8mm
Amaando - Wheel Bearing Seal - Rear - 401983N - TC 50x62x8 - 50mm x 62mm x 8mm

$4.99

View Details