Professional Car Front Parking Sensor Assistant System Buzzer Alarm

Description: Car front radar detection system Features: 1: Professional car front parking sensors. 2: In the cab, you can't see the product. When it is working, you can hear the sound of the alarm! Many luxury cars use this type of product Installation diagram White-----brake light positive Black-----GND Red ------ ACC+ Two conditions for the operation of front-end radar 1: When braking 2: When the sensor detects an obstacle What is the difference between front radar and rear radar? Difference 1: The professional front radar can still work for about 10 seconds after power failure. For example, the driver activated the front radar at position 1, and when car reached position A, the car's speed was already slow. At this point, the driver will no longer brake, and the power to the radar will be disconnected. However, the product will continue to operate for about 10 seconds to detect and alarm at locations B and C. Difference 2: A professional front-end radar should have a detection range of around 1 meter, as the driver can clearly see obstacles beyond 1 meter As shown in the following figure: When waiting for a red light, if a useless alarm is generated due to the detection distance being too far, it may sound annoying Professional front radar VS rear radar Front radar: When braking, the sensor starts to work. When it detects obstacles, the system starts to alarm; when the brake is released, the main power of the system is disconnected. At this time, the main board capacitor discharges the power, and the sensor continues to scan for 10 seconds and then stops. In order to make the driver turn or change lanes in small places, release the brakes, and get the warning of the parking sensor during the refueling process. Finally, the above two functions, the rear parking sensor does not have this function. Smart start When braking, if the obstacles are not activated, the user-friendly design avoids the troubles caused by the endless starting system. Product parameters 1>Detection range: 0.3M~1M 2>Rate voltage: 12V DC 3>Rate operating range: 10.5V - 16V DC 4>Rate current: 100mA - 300mA 5>Ultrasonic frequency: 40KHz 6>Control moudle working temperature: -30 - 80 celcius degree 7>Display working temperature: -20 - 70 celcius degree 8>Sensor diameter: 22mm 9>Installation mode: Drilling A：High volume B：Medium volume C：Mute The sensor uses a flat double-angle design, which features: high sensitivity, stability, waterproof, dustproof, beautiful, anti-false alarm

Price: 60.15 USD

Location: China

End Time: 2024-12-19T07:11:01.000Z

Shipping Cost: 0 USD