Description: Is your tailgate rattling? Tighten it up with these 3d printed tailgate bushings. I made these for my 2002 Tundra and thought that others might be interested in getting a set. They work amazing! Along with some new 3d printed rubber tailgate bumpers, my tailgate is tight and no longer rattles at all. Another thing these bushings fixed was the tailgate not opening because at least one of the latches was not releasing fully when you pull the release handle. Apparently, the bushings were so loose, the release rods were not able to fully release the latches when you pull the handle. Now, the tailgate doesn't rattle and the handle fully releases the latches again when I open the tailgate. Awesome! These were made to fit the following vehicle(s):2000-2006 Toyota TundraPARTS INCLUDED:Two (2) plastic tailgate bushings INSTALLATION INSTRUCTIONS:Remove tailgate. This is done by removing the straps, then lifting the tailgate about 45 degrees, then pulling the right side up and out of the hinge. Now the left hinge can slide out of the hinge. Drill out the rivets holding the old plastic bushings in place.Drill out the rivet hole slightly larger to fit a #8 bolt. I used a 5/32 or 11/64 or similar drill bit.Liberally grease up the bushings and install. Note the flat spots and alignment nubs in the bushing that match up with the flat spots and holes in the tailgate hinge. They also fit tight, so it may require some gentle persuasion. i.e. rubber mallet.Install #8 bolt with some threadlocker to hold the bushing in place.Reinstall tailgate. Enjoy the quiet.BONUS TIP: Prevent your tailgate from getting stolen by putting a hose clamp around the right hinge.If you need some customized, replacement rubber tailgate bumpers, send me a message. Due to age, wear, or damage, you may need thicker/thinner rubber bumpers that are not available as factory replacements. I can make them whatever thickness you need. Also, let me know about anything else that we need for our trucks that is no longer made. I will see if I can design and make it.
Price: 15 USD
Location: Garden City, Idaho
End Time: 2024-12-08T07:57:58.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Returns Accepted: ReturnsNotAccepted
Brand: Unbranded
Type: Tailgate
